DFM-32-200-P-A-GF (170863) guided drive

Item number:

OT-FESTO004518

€517.58
pcs
Also notice our alternatives
Our alternatives with the same function
Guide cylinder, with slide bearing, pistons 32mm,stroke 200mm (ZDFM 32/200 G)
ZDFM 32/200 G
Guide cylinder, with slide bearing, pistons 32mm,stroke 200mm
€971.65
Immediately available
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Guide cylinder, with slide bearing, pistons 32mm,stroke 200mm (SGM 32/200)
SGM 32/200
Guide cylinder, with slide bearing, pistons 32mm,stroke 200mm
You will save 22%
€405.65
Immediately available
You are not logged in. The availability display refers therefore to 1 pcs. Log in to have the availability of the requested quantity displayed.
Properties
Centre of mass distance of payload to Joch plate [mm] 50
Stroke [mm] 200
Piston diameter 32 mm
Operating mode actuator unit Joch
Dampening P: Elastic silencer rings / plates double-sided
installation position arbitrary
Guide sliding guide
Construction set up Guide
Position detection For proximity switch
Operating pressure [bar] 1.5 to 10
Max. speed [m/s] 0,8
Principle of operation double acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Information about operating and control medium Oiled operation possible (required in further operations)
Corrosion resistant class KBK 1 - low corrosion stress
ambient temperature [°C] -20 to 80
Impact energy at the end positions [J] 0,400
Max. permitted moment load Mx depending on stroke [Nm] 5,000
Max. usable load depending on the stroke at a defined distance xs [N] 127,00
Theoretical force at 6 bar, Return flow [N] 415
Theoretical force at 6 bar, flow [N] 482
Moving mass [g] 2.232,0
Product weight [g] 4.781,0
Alternative connections See product drawing
Pneumatic connection G1/8
Material information RoHs compliant
Cover material Aluminium wrought alloy
Seals material NBR
Housing material Aluminium wrought alloy
Piston rod material High-alloyed stainless steels
Further information on OT-FESTO004518
Weight 4.781,0 g / pcs
Customs duty number 84123100
Manufacturer Festo
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available