Compensator, DN32, R 1-1/4" (AG)-G 1-1/4" (IG), NBR

Version:
elastic, form-pressed bellows, reinforcement carrier made of synthetic fibres, connections screwed on both the sides

Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)

Materials:
Bellows: EPDM (hot water, acid and alkalis resistant), thread connections: Malleable cast iron, galvanised zinc plated, flat seal: Aramide NBR

Temperature range:
max. +110 °C (depending on operating pressure)

Operating pressure:
-1 to 16 bar (from +60°C: 10 bar, from +100°C: 6 bar), burst pressure: 50 bar (For intermittent loading, the max. operating pressure should be set approx. 30% lower)

Warning:
When installing the compensator, it is urged to follow the assembly instructions in all cases!

Optional:
Bellows from NBR, oil resistant -B

G1	R 1-1/4" (male thread)
G2	G 1-1/4" (female thread)
Bellows version	NBR
Version	Male/female thread
DN [mm]	32
Axial compression [mm]	30
Axial stretching [mm]	10
Lateral offset [mm]	15
Angular deviation [°]	25
L [mm]	212
SW1 [mm]	75
SW2 [mm]	47

{{ $t('shop.all.gewicht') }}	2,6 kg / pcs
{{ $t('shop.display.artikel.zollwarennummer') }}	40169991
{{ $t('shop.display.artikel.rohskonform') }}	{{ $t('shop.all.ja') }}